Healthcare logo Product Range

Saf-t-Vac Diathermy Diathermy Smoke Evacuation

Saf-t-Vac Diathermy Serres System Accessories Diathermy Smoke Evacuation

Features & Benefits

  1. Tough, polyethylene liner material

Product Support

Support Documents


Serres Suction Liner Brochure






Product Codes

Product Code Declared Use Product Description Unit of Sale NHSSC
ST9000Single Use Serres System AccessoriesSaf-t-Vac Diathermy, Serres System Accessories, Diathermy Smoke Evacuation, Single Use10

Use your finger to scroll the table right and left.

Frequently Asked Questions

Serres Suction Bags are easy to install with a help of vacuum. Just unfold the suction bag place it into the suction canister, turn on the suction source, and the suction bag will inflate automatically. Then close the patient connector with your finger, and simultaneously push the suction bag slightly from the middle of the lid. Wait until the desired vacuum is established and that the suction bag is fully inflated.
There are several options for mounting canisters that use Serres Suction Bags, including movable Serres trolleys or brackets that enable installation on walls, rails, tables and tables.
All Serres Suction Bags have a patented, single connection system, so there is only one angle connector for the patient tube. This ensures error-free and fast installation of Serres Suction Bags.
Simply check that the suction bag is fully inflated and that a vacuum has formed.
For safety and hygiene reasons, Serres Suction Bags must be replaced after every patient. If the suction bag is used in an ICU or ward, it is recommended that the suction bag is replaced at least every 24 hours.